Click image to view full size image
Description:
smt double sidedsplice tape1.8mm , 12mm, 16mm
2.2pcsyellow tapes
3.double sided
4.Easy to operate
Double SMT Splice Tape
1. Kapton tape is made of high temperature HN series polyimidefilm.
2.This Polyimide tape is used in masking of circuit boardsduring wave soldering or other electronic manufacturing
processes. It can be used in powder coating,automotive and transformer manufacturing.
3. It has high dielectric strength. Kapton masking tape, offersexcellent performance in electrical and thermal
insulation.
4. This Kapton tape is made of 1 Mil Polyimide material with 1.5mil of silicon adhesive which does not leave any
residue. It can withstand temperatureup to 380°C.. It is packaged in 3" core and is 36 yards long.
5. Kapton Tape Applications: Electrical Insulation, Goldleaf mask of printed circuit boards during wave soldering,
transformer and capacitor insulation,powder coating and high temperature applications.
Physical Properties
| Adhesive Type: | Silicone |
| Backing Thickness (mm): | 0.025 |
| Total Thickness (mm): | 0, 065 |
| Peel Strength (N/cm): | 2.2 |
| Tensile Strength (N/cm): | 53 N/10mm |
| Elongation (%): | 50 |
| Temperature Range: | Continuous 180 short periods up to 380° |
Chemical Properties
| PHvalue of aqueous extract: | 4.0 -6.0 |
| Freedomfrom corrosive sulphur: | No stain oncopper |
| Storage: | The conditionsunder which this product is stored may affect its performance.Storage should be in dry, well ventilated rooms with a constitutetemperature of around 20° C and should be protected from continuousexposure to direct sunlight. |
| Methodof Application: | The productshould always be applied to clean, dry, surfaces |
Double SMT Splice Tape
